Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1131 AP site-survey functionality

Hello -

I want to perform a site-survey using Airmagnet and a Cisco AIR-LAP1131AG-A-K9.   In the past I have done all my site surveys using the 1000 Series LWAPP APs.  The 1000 Series APs had a dip switch setting that I needed to alter by taking the side panel off the AP.   This worked great.

With the 1131 AP I am wondering if the same option exists for when in LWAPP mode or if I need to convert it to autonomous and then just use the default "tsunami" SSID for my site survey process.

Please advise.

Regards

Chuck

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 1131 AP site-survey functionality

Hi Chuck,

Please convert the LAP to autonomous for better result.

2 REPLIES
Hall of Fame Super Gold

Re: 1131 AP site-survey functionality

Hi Chuck,

Please convert the LAP to autonomous for better result.

New Member

Re: 1131 AP site-survey functionality

Yes, this is exactly what I did.  I converted the 1131s to autonomous, enabled the radios and configured a basic SSID, to broadcast in beacons.  I can now use Airmagnet site surveyor to perform site surveys.

Chuck

331
Views
0
Helpful
2
Replies