1. Only one SSID (CscWP) is configured on each radio. You'll need to apply the other SSID to the radio/radios as desired. In the GUI, simply go under SSID Manager, select the other SSID (AkAeroWiFi), and apply it to one or both of the radios by checking the appropriate boxes to the right under "Interface".
2. Currently, both SSIDs are configured for broadcast. In the GUI, go under SSID Manager, select an SSID, and scroll all the way to the bottom. Click the radio button for "Single BSSID", then use the dropdown box to select which SSID you want on broadcast.
I'm honestly not sure why running this configuration results in you not seeing any SSIDs being broadcast at all. I would expect the CscWP SSID to be broadcasting. Try making these configuration changes and let us know what you find.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...