Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1142 AP not getting power from 2106 WLC

I have been facing problem with POE ports( port 7 and 8) in 2106 WLC. I have connected AP 1142 on port 7 of 2106 controller but it is not comming up.

Bewlo is the command output. Not sure why the port is in power off mode.

(Cisco Controller) >show port summ

           STP   Admin   Physical   Physical   Link   Link

Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE   

-- ------- ---- ------- ---------- ---------- ------ ------- ---------

1  Normal  Forw Enable  Auto       100 Full   Up     Enable  N/A    

2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

3  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

4  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

5  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

6  Normal  Forw Enable  Auto       100 Full   Up     Enable  N/A    

7  Normal  Disa Enable  Auto       Auto       Down   Enable  Enable  (Power Off)

8  Normal  Disa Enable  Auto       Auto       Down   Enable  Enable  (Power Off)

5 REPLIES

Re:1142 AP not getting power from 2106 WLC

Are you able to try and connect the LAPs to another PoE port on another device?


Sent from Cisco Technical Support Android App

-- CCNP, CCIP, CCDP, CCNA: Security/Wireless Blog: http://ccie-or-null.net/
New Member

Re:1142 AP not getting power from 2106 WLC

yes, I have tried another working AP on the POE ports but it didn't get power. Why the POE status is power off? Via power injector it just work fine. Something is wrong with the POE ports not why WLC is not providing power to AP.

Hall of Fame Super Silver

Re: 1142 AP not getting power from 2106 WLC

Try to issue the following:

config port power all enable

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

1142 AP not getting power from 2106 WLC

no success ;-(

Still the port are in power off state.

(Cisco Controller) >show port summary

           STP   Admin   Physical   Physical   Link   Link

Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE   

-- ------- ---- ------- ---------- ---------- ------ ------- ---------

1  Normal  Forw Enable  Auto       100 Full   Up     Enable  N/A    

2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

3  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

4  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

5  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A    

6  Normal  Forw Enable  Auto       100 Full   Up     Enable  N/A    

7  Normal  Disa Enable  Auto       Auto       Down   Enable  Enable  (Power Off) ----<<<<<<<<

8  Normal  Disa Enable  Auto       Auto       Down   Enable  Enable  (Power Off) ----<<<<<<<<

Hall of Fame Super Silver

1142 AP not getting power from 2106 WLC

Then your 2016 went bad. 

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
264
Views
0
Helpful
5
Replies