Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1142N Regulatory Domain

Hi,

Can someone please confirm which model 1142N APs I need to buy to operate in Australia with 4404 WLCs please? From what I can tell I need model AIR-LAP1142N-N-K9, is this correct? We're still running pre-CAPWAP v4.2.x.x software on the WLCs by the way.

Thank you.

Brodie

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Red

Re: 1142N Regulatory Domain

Hall of Fame Super Gold

Re: 1142N Regulatory Domain

Australia should be using the "N" regulatory domain.  And Rob's right, 1140 is supported on the 6.X (and later) firmware.

7 REPLIES
Hall of Fame Super Red

Re: 1142N Regulatory Domain

New Member

Re: 1142N Regulatory Domain

Thanks for the good news. When they didn't associate it crossed my mind that I may have bought over a hundred of these with the incorrect reg domain. But now I'm pretty sure I just have to upgrade the WLC software. I'll go to the v6.x assurewave software I guess.

Hall of Fame Super Red

Re: 1142N Regulatory Domain

Hi Brodie,

Good stuff

Yes, I'm sorry I missed that in your first post, but the 1140 series was not supported

in any 4.x.x.x WLC versions. I like your thinking of upgrading to the Assurewave

6.x. Make sure we check the exact upgrade path to 6.x before moving forward.

Cheers!

Rob

New Member

Re: 1142N Regulatory Domain

Yep, I'm going:

WLCs 4.2.207.0 to 6.0.196.0

WCS 4.2.128.0 to 6.0.181.0

Location App 3.1.43.0 to 6.0.101.0

Cisco Secure ACS 4.1 to 4.2

That should do it.

Cheers

Hall of Fame Super Gold

Re: 1142N Regulatory Domain

Thanks for the ratings.

By the way, firmware 7.X is now available.

New Member

Re: 1142N Regulatory Domain

It'd take some convincing to upgrade to a new version without a ribbon.

Hall of Fame Super Gold

Re: 1142N Regulatory Domain

Australia should be using the "N" regulatory domain.  And Rob's right, 1140 is supported on the 6.X (and later) firmware.

630
Views
0
Helpful
7
Replies