Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1200 AP configuration question

I am setting up a 1200 AP. If you go to >Network Interfaces >Radio0-802.11g >Settings, there is a setting for "External Antenna Configuration". I am using an external Hi-gain antenna. Do I set this to enabled? And if yes, it doesn't want to accept the dbi setting even though it seems to me to be within the accepted range. Any assistance is appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 1200 AP configuration question

Hi Johnny,

In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: 1200 AP configuration question

Hi Johnny,

In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml

Hope this helps!

Rob

161
Views
0
Helpful
1
Replies