Need to setup several SSID's with different Encryption levels. The access point connects to a plain D-link switch, not able to define a truck on the switch which is causing problems when only one of the SSID's is set for Native VLAN (DHCP server cannot be contacted with the other SSID's).
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...