Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1242AG Help

I am trying to configure a

1242AG with 2 Vlans, Guest and Admin - there is an example paper by Cisco showing just this scenario but it doesn appear to work-  I was convinced the configuration is correct but the users PC cannot see either SSIDs - Guest is set to WEP and Admin is set to WPA2 TKIP - is there any way I can show that the 1242 is transmitting ?

many thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 1242AG Help

remove from the global config

dot11 mbssid

And under interface interface Dot11Radio0

Add

mbssid

and change to

station-role root

And test again

5 REPLIES

Re: 1242AG Help

Post your config - or the url to the article.

New Member

Re: 1242AG Help

config as requested

Re: 1242AG Help

remove from the global config

dot11 mbssid

And under interface interface Dot11Radio0

Add

mbssid

and change to

station-role root

And test again

New Member

Re: 1242AG Help

Andrew -

apologies for the rating - I tried to give it maximum

but for some reason only got 4 star !!  

Many thanks for your help

regards

Keith

Re: 1242AG Help

Keith - no problem, thanks for the rating anyway - appreciated.

268
Views
0
Helpful
5
Replies