Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1252 autonomous to lightweight

hey all,

i ma having a problem with upgrading a 1152 to lightweight mode. i have tryed the cisco Update Tool ( used it successfully on other models of AP'S)

but when i try to do this one it says the lwapp image is incorect. i am using the c1250-rcvk9w8-tar.124-21aJA2.tar image. i have followed the guide on the cisco site:

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

thanks

Scott

3 REPLIES
Hall of Fame Super Gold

Re: 1252 autonomous to lightweight

Here's an easier method.

1.  Copy by extracting the IOS TAR file into the AP using the command "archive download-sw /over tftp:///c1250-rcvk9w8-tar.124-21aJA2.tar".

2.  Make sure the AP boots into the "rcv" image.

3.  Process complete.

Don't forget to rate our useful posts.  Thanks.

New Member

Re: 1252 autonomous to lightweight

Hi Leoaohoo

thanks for the fast reply, when i do that i get an error:

examining image...

" Error opening ( Timed out ) "

archive download takes 41 seconds

i have placed an IP n the AP'S BVI interface so it can ping the tftp server.

do i need to place the AP in Recovery mode? or is there somthing i am missing?

thanks

Hall of Fame Super Gold

Re: 1252 autonomous to lightweight

341
Views
0
Helpful
3
Replies