Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1260 AP Questions

Hi,

I have three questions about the 1260 APS.

Can they run autonomously?

Can I have them by PoE from the PoE ports on a  asa5505?

Can I use 3, 2.4 dipole antennas and 3, 5.8 dipole antennas instead of the other external antennas that attach with the cables AIR-ANT2451NV-R?

Thanks, Pat.

Everyone's tags (2)
5 REPLIES

1260 AP Questions

The answer to all three is yes.

For the directly connecting to the ASA, you can do it, but make sure you can configure the port as a trunk if you are going to have multiple SSID.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: 1260 AP Questions

Stephen,

if I use 1 SSID and VLAN for 1 AP and 1 SSID and VLAN for the other, I should be fine with access ports, correct? Also, I could just keep  both SSIDs on the same VLAN and then apply both SSIDs to both APs, correct?

Thanks.

1260 AP Questions

yup, that should be fine.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: 1260 AP Questions

Did you catch my edit to my last post. I think you answered before I was able to edit it.

Thanks, Pat.

Re: 1260 AP Questions

No, I didn't catch the edit.  But that should work.  If you are using the same SSID, then you want the AP on the same VLAN, so you can roam between them.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
447
Views
15
Helpful
5
Replies
CreatePlease login to create content