Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1262 AP Only one radio appears

We have 6 1262 APs and a 2504 WLC.  5 of the 1262 appear correctly with 2 radios.  One of them shows 1 radio.  See screen shots below showing model numbers and interfaces on the AP with one radio available (All other 1262s show 2 radios as normal).  Tried resetting the AP to factory default, but same result.  Do I have a defective AP?

Thanks,

one radio.pngone radio2.png                  

Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: 1262 AP Only one radio appears

Looks like it. It possible the radio chip got unseated during transit. But I'd just RMA it.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
3 REPLIES

Re: 1262 AP Only one radio appears

Looks like it. It possible the radio chip got unseated during transit. But I'd just RMA it.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Hall of Fame Super Gold

1262 AP Only one radio appears

Try rebooting the WAP.  I've seen this happen several times to 1140 and 3500.  Sometimes a simple reboot can help.

Otherwise, console into the WAP and post the entire bootup sequence.

New Member

1262 AP Only one radio appears

Resetting to factory default rebooted it and set it to the original config - neither should be an issue.  Agree with Stephen - RMA.

402
Views
0
Helpful
3
Replies