Re: 1300 Root Bridge to Non-root bridge not working
Assuming no security (for testing ONLY!), configure one bridge as a root bridge, define an SSID and enable the radio. Configure the other as non-root, define the SSID and flag it as the infrastructure SSID (see near the bottom of the SSIDs web page), enable the radio and it should associate assuming I haven't forgotten anything : )
Once the link is up you can layer on security, nail the frequency, etc.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...