i purchase a 1310 aironet that i would like to use as a AP to connect to from my laptop 1km away i'm planning on putting it on my roof which is about 12ft however i can add a 10ft pole making it 22ft what antenna can i use with it that would give me the best signal i do not have line of sight to the remote location any suggesion
There are a few issues with this idea. One, you need clear line of site. Two, your laptops wireless card will not have the transmit power to reach the bridge.
If you were going to use two 1310 bridges, then I would suggest using the internal antenna model as that will work fine. If you prefer to use the external antenna model, then I would suggest a yagi antenna.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...