Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

1500 w'less bridge and AP at the same time ?

I am going to install two 1500 mesh devices to bridge two LAN segments.

CAn I use the same 1500 box to proivide wifi access to the clients in the vicinity ? ie operating 1500 as P and bridge siumuntaneously ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 1500 w'less bridge and AP at the same time ?

Hi Nalaka,

This is possible using the 1500. Have a look;

The access point provides client access and supports 6 to 54 Mbps data rates without the need for a license. The access point dedicates the 5-GHz radio for backhaul operations to reach a wired network and uses the 2.4-GHz radio for wireless clients.

Have a look at the examples in this doc;

Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

http://www.cisco.com/en/US/products/ps6548/products_installation_guide_chapter09186a00806a5082.html

Hope this helps!

Rob

Please remember to rate helpful posts........

1 REPLY
Hall of Fame Super Red

Re: 1500 w'less bridge and AP at the same time ?

Hi Nalaka,

This is possible using the 1500. Have a look;

The access point provides client access and supports 6 to 54 Mbps data rates without the need for a license. The access point dedicates the 5-GHz radio for backhaul operations to reach a wired network and uses the 2.4-GHz radio for wireless clients.

Have a look at the examples in this doc;

Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

http://www.cisco.com/en/US/products/ps6548/products_installation_guide_chapter09186a00806a5082.html

Hope this helps!

Rob

Please remember to rate helpful posts........

200
Views
0
Helpful
1
Replies
CreatePlease to create content