1522 Outdoor Access Point Clarification

[ciscokid7181]

Dear Folks, 

One of our client requires Outdoor Access Points across the campus, UTP outdoor cable would be provided. 

I would like to clarify the following points
 
1. Does the Standard model 1522 Access Point support POE that can take direct from POE Switch or is POE injector mandatory ? 

2. Is mounting kit included or ordered extra ? 

Appreciate your kind help and support . 

Regards, 

SID

[Leo Laohoo · Accepted solution]

Outdoor APs require injectors.

[ciscokid7181]

Thanks, 

If i purchase this unit, does it come along with the power cable and adaptor ? As i dont see in the configurator / datasheet , i assume it is built in . 

Regards, 

SID

[Scott Fella]

You can find the part numbers here:

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-ag-series/product_data_sheet0900aecd8066a157.html

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

[Scott Fella]

Typically you would hard wire the power to the units that are considered MAP's, or the AC adapter.  The RAP's typically would have a power injector to power that unit up.

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty