05-09-2014 12:54 AM - edited 07-05-2021 12:48 AM
Dear Folks,
One of our client requires Outdoor Access Points across the campus, UTP outdoor cable would be provided.
I would like to clarify the following points
1. Does the Standard model 1522 Access Point support POE that can take direct from POE Switch or is POE injector mandatory ?
2. Is mounting kit included or ordered extra ?
Appreciate your kind help and support .
Regards,
SID
Solved! Go to Solution.
05-09-2014 01:07 AM
Outdoor APs require injectors.
05-09-2014 01:07 AM
Outdoor APs require injectors.
05-09-2014 01:23 AM
Thanks,
If i purchase this unit, does it come along with the power cable and adaptor ? As i dont see in the configurator / datasheet , i assume it is built in .
Regards,
SID
05-09-2014 09:02 AM
You can find the part numbers here:
http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-ag-series/product_data_sheet0900aecd8066a157.html
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty
05-09-2014 09:04 AM
Typically you would hard wire the power to the units that are considered MAP's, or the AC adapter. The RAP's typically would have a power injector to power that unit up.
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide