Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1552e question

Dear All,

Can i use 1552e controller with 2504 wireless controller? and if  cisco has any design with this type of AP, please assist me, thank you

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

1552e question

Yes you can use this AP wth 2504 Controller.

1552AP needs minimum software release 7.0.116.0

what kind of design you want ???, you need to connect this AP to WLC.

Regards

1552e question

5 REPLIES
VIP Purple

1552e question

Yes you can use this AP wth 2504 Controller.

1552AP needs minimum software release 7.0.116.0

what kind of design you want ???, you need to connect this AP to WLC.

Regards

New Member

1552e question

I thought i can use them as mesh network    

VIP Purple

Re: 1552e question

Yes Its a mesh AP, and you can use this as Mesh.

First try to connect it to WLC.

Regards

dont forget to rate helpful posts

1552e question

New Member

Re: 1552e question

Hi Kamran,

Sharing the link for :

Cisco Wireless Mesh Access Points, Design and Deployment Guide:

http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html

The AP can be used as MESH with RAP and MAP setup. We need to put the Ethernet mac of both the APs in the Mac filter list of the WLC and then they would join with the AP mode as Bridge. Once the AP joins the WLC in bridge mode then you can configure the sub mode that is RAP(Root Access Point) ot MAP(MESH Access Point).

Thanks and regards,

Manas Pratap Singh

185
Views
0
Helpful
5
Replies