I have 1600 AP's registered with 5508 WLC running 184.108.40.206. I am experiencing a strange issue , after sometime client cannot connect to the 1600 AP and they are getting authentication error on the end devices. AP is not sending any traffic to the WLC . I tried to debug with the client mac address and I am not getting any single packet from the AP and once the client moves to the other access point I am able to see the logs.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...