Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

1602AP'interface Dot11Radio1 status reset down


SHO VER
Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.3(3)JN, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 02:41 by prod_rel_team

ROM: Bootstrap program is C1600 boot loader
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)

1602 uptime is 3 days, 19 hours, 52 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g2-k9w8-mx.153-3.JN/ap1g2-k9w8-xx.153-3.JN"
Last reload reason: 


cisco AIR-CAP1602I-C-K9 (PowerPC) processor (revision B0) with 187382K/74672K bytes of memory.
Processor board ID xxx
PowerPC CPU at 533Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 10.2.102.0
1 Gigabit Ethernet interface
2 802.11 Radios

1602#SHO IP INT BRI
Interface                  IP-Address      OK? Method Status                Protocol
BVI1                       172.16.233.200  YES DHCP   up                    up      
Dot11Radio0                unassigned      NO  unset  up                    up      
Dot11Radio1                unassigned      NO  unset  reset                 down    
....

1602#SHO LOG

*Sep  8 17:18:00.545: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Sep  8 17:18:00.577: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Sep  8 17:18:00.585: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to resetPCI reset port 1
*Sep  8 17:18:01.893: soap_pci_reconfig_radio: radio id 1
*Sep  8 17:18:20.021: Cmd Timeout After 12s

*Sep  8 17:18:20.021: mvl_handle_timeout called cmdtype=[0x9]

*Sep  8 17:18:21.625: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Sep  8 17:18:21.657: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Sep  8 17:18:21.665: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to resetPCI reset port 1
*Sep  8 17:18:22.973: soap_pci_reconfig_radio: radio id 1
*Sep  8 17:18:41.101: Cmd Timeout After 12s

 

 

Everyone's tags (1)
5 REPLIES
Hall of Fame Super Blue

Post the following command

Post the following command outputs: 

 

  1. WLC:  sh sysinfo; 
  2. AP:  sh inventory
Community Member

i have many 1602 AP connect

i have many 1602 AP connect to poe switch, only this 1602 ap with this issus

================================================

WLC 5760:

AIR-CT5760#sho  ver
Cisco IOS Software, IOS-XE Software, 5700 Series Wireless LAN Controller Softwar
e (CT5760-IPSERVICESK9-M), Version 03.06.00E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 27-Jun-14 01:01 by prod_rel_team

 

Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

 

ROM: IOS-XE ROMMON
BOOTLDR: CT5760 Boot Loader (CT5760-HBOOT-M) Version 1.0, RELEASE SOFTWARE (P)

AIR-CT5760 uptime is 9 weeks, 5 days, 1 hour, 41 minutes
Uptime for this control processor is 9 weeks, 5 days, 1 hour, 43 minutes
System returned to ROM by reload at 11:20:13 UTC Wed Apr 9 2014
System restarted at 11:20:07 beijing Fri Jul 4 2014
System image file is "flash:packages.conf"
Last reload reason: reload

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: Ipservices
License Type: Permanent
Next reload license Level: Ipservices

cisco AIR-CT5760 (i686) processor with 10485760K bytes of physical memory.
Processor board ID XXX
11 Virtual Ethernet interfaces
6 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
10485760K bytes of physical memory.
255000K bytes of Crash Files at crashinfo:.
3612840K bytes of Flash at flash:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of  at webui:.

Base Ethernet MAC Address          : 1c:1d:86:25:68:00
Motherboard Assembly Number        : 73-14448-04
Motherboard Serial Number          : XXX
Model Revision Number              : A0
Model Number                       : AIR-CT5760
System Serial Number               : XXX


Switch Ports Model              SW Version        SW Image              Mode
------ ----- -----              ----------        ----------            ----
*    1 6     AIR-CT5760         03.06.00E         ct5760-ipservicesk9   INSTALL


Configuration register is 0x201 (will be 0x102 at next reload)

AIR-CT5760#

================================================

  
  
  
  
  
  
  
Hall of Fame Super Blue

And what country or

And what country or regulatory domain is the WLC configured for?

Community Member

i have lots of 1602 ap, only

i have lots of 1602 ap, only this ap with interface radio 1 reset down

 

country is cn

Hall of Fame Super Blue

On the WLC, what is the

On the WLC, what is the output to the command "sh inventory"?

390
Views
0
Helpful
5
Replies
CreatePlease to create content