1941W Router with ADSL - getting wireless clients connected to internet
Hello, hoping someone can help me, I have 99% of the config done however not sure why the wireless clients are not connecting to the internet, its probably something very simple im missing!
The access point has been setup, wireless network is up and running, clients can connect, are given IP's via DHCP (10.0.16.20 - 30)
and can ping Vlan 1 (10.0.16.254) and Gi0/0 (10.0.15.254).
The PPPoA ADSL has also been setup and is connected, the router can reach the internet.
What I want is for wireless clients to be able to reach the internet, but also for wired clients (conected to a switch which connects to Gi0/0. The wired clients are given IP's via DHCP (10.0.15.20 - 50), and these also need to reach the internet.
The configs of the router and AP are attached, is there anything im missing? Thanks.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...