Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2000 Series controller install

We have installed a 2000 series wireless controller and connected an 1131 series access point. The controller detects the access point but returns several error messages. For instance: Refusing Image Download

Any ideas?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: 2000 Series controller install

i had a similar problem last week. you need to donwload the latest firmware for the controller. i called the tac and they had me download the latest firmware and that took care of it. personally, i can't believe they would ship such a poor firmware, but that appears to be the problem.

good luck.

3 REPLIES
Community Member

Re: 2000 Series controller install

i had a similar problem last week. you need to donwload the latest firmware for the controller. i called the tac and they had me download the latest firmware and that took care of it. personally, i can't believe they would ship such a poor firmware, but that appears to be the problem.

good luck.

Community Member

Re: 2000 Series controller install

10-4

You're exactly correct, that fixed it. Thanks for the reply.

Community Member

Re: 2000 Series controller install

Thanks for all the postings on 2006 Controller. Would like to know how to upgrade 2006 with 2.2 firware to the latest 3.2.always get an error "Insufficient Flash Memory" error when the new firmware is extracted.

Thanks for your help,

Best Regards,

146
Views
0
Helpful
3
Replies
CreatePlease to create content