Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

2500 series and aircap 1602i-z-k9

we recently bought a cisco 2500 series with 5 AP's i managed to do a basic config of the 2500 series and then tried to add the aircap .the problem is tht the auto discovery of the aircap doesnt seem to be happening as it should be.i am not an expert in configuring this as i am doing it for the first time here is the message from the aircap's console

APb0fa.eb3d.8bec#

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.46.3.235

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  3 02:21:21.772: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

Not in Bound state.

*Mar  3 02:21:37.272: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.

*Mar  3 02:21:40.276: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.

*Mar  3 02:21:40.348: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.46.2.14, mask 255.255.254.0, hostname APb0fa.eb3d.8bec

Translating "CISCO-CAPWAP-CONTROLLER.skynews.net.au"...domain server (10.46.2.199)

*Mar  3 02:21:47.272: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.skynews.net.au

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.46.3.235

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  3 02:21:50.272: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.46.3.235

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  3 02:22:10.272: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

any help on this wud be appreciated pls

Cheers

Manish

3 REPLIES
Hall of Fame Super Silver

Re: 2500 series and aircap 1602i-z-k9

The code your running in the WLC isn't supported by the 1602's. You need to run v7.4. Here is a link to a compatibility matrix.

MWAR 'Cisco_88:6e:04'running version 7.0.220.0 is rejected.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: 2500 series and aircap 1602i-z-k9

Also when upgrading to v7.4, make sure you also upgrade the FUS image. This is a separate image and takes about 35-45 minutes to complete.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_1_7_0_0.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

2500 series and aircap 1602i-z-k9

i have downloaded v7.4 100.0 and FUS 1.8...do i just follow these steps ?? as in put both of  them on a FTP server and then just download the file onto it ???

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.pdf#page14

792
Views
0
Helpful
3
Replies