08-11-2014 05:30 AM - edited 07-05-2021 01:21 AM
I have a 2504 WLC and need to know how to make my guest users lifetime more than 30 days
08-11-2014 06:43 AM
Hi,
Only with wlc, you can not make a lifetime for 30 days for a guest user.
it can be maximum for 24 hours not more then that and after that he must have to login again.
Check this timeout settings:
http://rscciew.wordpress.com/2014/05/07/timeout-setting-on-wireless-lan-controller/
I hope this is what you wanted to know, if anything else then please clarify.
Regards
dont forget to rate helpful posts
08-11-2014 07:35 AM
I am looking to make a guest user last at least a year before expiring.
08-11-2014 07:54 AM
Hi,
Are yo using any external radius server to create guest user accounts or authentication ??
Regards
08-11-2014 07:56 AM
I am greating the guest under Local Net Users
08-11-2014 08:04 AM
Did you try to put Lifetime in seconds(5184000) --> this is for 60 days
If you cant do this then there is No other way to do more then 30 days with wlc.
Either you must use Prime infra or ISE server to make it more.
Regards
Dont forget to rate helpful posts
08-11-2014 09:37 AM
It will only take 30 days in seconds
08-11-2014 09:40 AM
Mke,
Then ther is no otherway to inrease lifetime for guest users on wlc.
*** Use ISE server.
Regards
Dont forget to rate helpful posts
08-11-2014 10:37 AM
I would like to keep it simple using on the WLC. It is just for a small number of guests.
08-14-2014 06:06 PM
Please refer the link :
https://supportforums.cisco.com/discussion/11610961/wlc-2504-guest-user-life-time
08-15-2014 04:42 AM
I have reviewed this article and it does not work on my 2504
08-15-2014 05:06 AM
Guest user with the latest code is max 30 days. If you want a user to be lifetime, then you need to add the user not as a guest but a regular wireless user. These types of users don't expire, but lobby admin will not be able to add these types of users, only guest.
Scott
08-15-2014 05:09 AM
I know how to make them lifetime however I would like to set up a user for 90 days.
08-15-2014 05:13 AM
30 days is max...
You could always contact your local Cisco SE and have a feature request put in. How long that would take and if they even entertain it is a different story. Your only solution is to add or extend that guest account every 30 days.
Scott
08-15-2014 06:25 PM
Will this same problem happen on 5508 and 8510?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide