Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2504 wireless controller - turn off / disable options during off peak hours

       I'm configuring a 2504 wireless controller with # of 1142 APs, wondering is there an option to turn off the WLC/ APs during after ofice hours? such as turn off power/RF options etc

3 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Re: 2504 wireless controller - turn off / disable options during

There is not an option from the wlc. You can maybe use a pdu to power off the wlc on a schedule. I know some switches support shutting PoE ports if you want.

Switches that support Energywise

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***

Re: 2504 wireless controller - turn off / disable options during

no option on wlc. you can achieve this however if you have WCS or NCS.

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"

Re: 2504 wireless controller - turn off / disable options during

If you have WCS / NCS, you could push a template to the controllers. Not sure about the HP swicthes, I have limited experience with those. On Cisco you can you do a time ACL.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
5 REPLIES
Hall of Fame Super Silver

Re: 2504 wireless controller - turn off / disable options during

There is not an option from the wlc. You can maybe use a pdu to power off the wlc on a schedule. I know some switches support shutting PoE ports if you want.

Switches that support Energywise

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***

Re: 2504 wireless controller - turn off / disable options during

no option on wlc. you can achieve this however if you have WCS or NCS.

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"

Re: 2504 wireless controller - turn off / disable options during

What about a "time" ACL on your swicths to do a SHUT to your APs.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Community Member

Re: 2504 wireless controller - turn off / disable options during

I'm not sure about that George.. we have a hp5412zl where the Aps are connected..

is it possible to shut off the ports for a period of time?

Re: 2504 wireless controller - turn off / disable options during

If you have WCS / NCS, you could push a template to the controllers. Not sure about the HP swicthes, I have limited experience with those. On Cisco you can you do a time ACL.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
1390
Views
0
Helpful
5
Replies
CreatePlease to create content