Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2504 Wireless controller with AIR-CAP2602

Hi,

 

I recently bought one cisco 2504 wireless controller, and two AIR-CAP2602E<
The configuration of the cisco 2504 went well.

Now i want to join the access points to this controller, which fails:

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.21.10)
*Mar  1 00:18:21.771: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. (192.168.21.12)

*Mar  1 00:18:39.771: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_46:c3:84'running version 7.0.220.0 is rejected.
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.21.23
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_46:c3:84'running version 7.0.220.0 is rejected.
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_46:c3:84'running version 7.0.220.0 is rejected.
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.21.23
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_46:c3:84'running version 7.0.220.0 is rejected.
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:19:27.771: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

 

What is wrong?

-time?

-firmware compatibility problem? This is all new?

 

Bruno

  • Getting Started with Wireless
2 REPLIES
VIP Purple

Firmware of WLC is not

Firmware of WLC is not compatible for this AP model

*Mar  1 00:18:55.771: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_46:c3:84'running version 7.0.220.0 is rejected.

 

2600 require min 7.2 where as your WLC running on 7.0.x. See below link (table 2)

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

So solution is upgrade your controller. Either go with 7.4.121.0 or 7.6.130.0.

 

HTH

Rasika

**** Pls rate all useful responses ****

Please upgrade your

Please upgrade your controller to the version that is compatible as i can see that the WLC version over here is not compatible.

110
Views
5
Helpful
2
Replies