Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2602e WAP standalone mode

                   I cannot get the https login to work on this Access Point.  THe WAP is up and working, however, I can not get in to manage it via https.  I can get in via ssh no problem.  Also, http works

VERSION:  flash:/ap3g2-k9w7-mx.152-2.JA/ap3g2-k9w7-xx.152-2.JA"

Relevant commands in config

no ip http server

ip http authentication aaa

ip http secure-server
ip http authentication aaa
ip http secure-server

Any thoughts?

Everyone's tags (2)
1 REPLY
Hall of Fame Super Silver

Re: 2602e WAP standalone mode

Maybe regenerate the cert.


Deleting an HTTPS Certificate

The access point generates a certificate automatically when you enable HTTPS. However, if you need to change the access point’s fully qualified domain name (FQDN) or you need to add an FQDN after enabling HTTPS, you might need to delete the certificate. Follow these steps:

Browse to the Services: HTTP Web Server page.

Uncheck the Enable Secure (HTTPS) Browsing check box to disable HTTPS.

Click Delete Certificate to delete the certificate.

Re-enable HTTPS. The access point generates a new certificate using the new FQDN.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
266
Views
0
Helpful
1
Replies
CreatePlease to create content