Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2800ISR

Hello,

I have a 2800 with a HWIC AP card. I'm trying to set up a basic wireless access point. It is my 1st time setting up a Cisco AP. I followed the Cisco documentation, but I still cannot see the wireless network from my card. Here is the wireless configuration:

dot11 ssid test

authentication open

interface dot11Radio0/2/0

Ip address 192.168.5.1 255.255.255.0

ssid test

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic 11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root

any help would be greatly appeciated.

3 REPLIES
Silver

Re: 2800ISR

The AP side configuration looks ok. If you are not able to see the network from the wireless client, it could be a client side issue. Are you using ACU or ADU for configuring the client?

New Member

Re: 2800ISR

I am not using the Aironet client or desktop. I have 802.11b/g users with Apple laptops, Apple Iphones, Windows PC Wireless clients, and Gaming consoles such as PS3/WII/Xbox. I am new to the Cisco wireless environment. It appears that I have a hidden SSID, which I will want later, but right now I want a broadcasted SSID.

New Member

Re: 2800ISR

It appears that the command "guest-mode" enables the broadcast of the SSID.

132
Views
0
Helpful
3
Replies