can I have two SSID on guest controller using the same interface? the first guest SSID is open, the second one needs to have WPA2. how do i go about this? I do have a firewall in between controller and guest controller.
Great question. As Steve answered, yes you can do this and here is how.
On your WLC you would create 2 WLANs. The WLANs will be configured to your liking, so WLAN1 is open and WLAN 2 is locked. Another way of thinking of this, think WLAN = Wireless side. In the WLAN config you can MAP which wired side interface you would like this WLAN traffic to land on. You could map both to the same wired side interface. Keep in mind, on the wireless one will be open and the other lock, but the users will get the same IP range and live in the same subnet, because they are both mapped to do so.
Assuming this is an anchor providing guest access, you will have to anchor the WLANs from the foreign to the anchor and anchor the anchor wlans to itself and make sure the configs are identical on the wlan. Read the guest anchoring config example. I would also create a dummy interface on the foreign controllers and anchor the foreign WLANs to them.
On the FW you will need to follow the above like. But in short you will need to open atelast EOIP 97 and 16666 ports. Here is a blog post i outlined ports for office extends, but also applies to anchor.
__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin __________________________________________________________________________________________ "I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...