3 Aironet 1140 access points in extension?

[Jesperdb85]

Hi

As the topic says, im wondering if its possible to setup 3 aironet accespoints (ap0, ap1 and ap2) in an extension?

Setup was inteded to be like following, ap0 (backbone) has connection to the network with 2.4 ghz AP disabled, ap1 working as an AP recieving connection from ap0, ap2 working as an access point recieving connection from ap0 through ap1.

Is this possible?

Best Regards

Jesper

[Leo Laohoo]

Wireless Bridges Point-to-Point Link Configuration Example
http://www.cisco.com/en/US/customer/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml