I have a deployent with a 340 series bridge acting as root bridge and two 340 bridges acting as non-root remotes. The hosts hanging off the non-root bridges can communicate with the hosts hanging off the root bridge but i cannot get communication to work between hosts on the two non-root bridges. Is there some sort of split horizon type setting I need to configure on the root-bridge to allow traffic back out the radio interface.
There isn't anything in the bridges that would block traffic between the two sites. Is this one large subnet, or are there two subnets? If there are two, how are you routing between the two?
Can one non-root bridge ping the other non-root?
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
