Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

350 AP blew UP!

After an unsuccessful upgrade from VX to IOS my 350 AP no longer boots. TAC says this type of issue must be RMA'd because there isn't any reset buttons. Warrent on the AP has expired and my company no longer has a support contract. Cisco wants $600 to RMA. Is there another alternative for me? Please help.

thanks

rr

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 350 AP blew UP!

No worries mate. You are still in good shape. Here is a link that has information about recovering from an upgrade falure. Look about 3/4's of the way down and you will see what you listed here along with a step by step on what to do .

http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/products_tech_note09186a008019fea0.shtml

Good luck and let me know how you manage.

Please remember to rate all posts

7 REPLIES

Re: 350 AP blew UP!

If you console into the AP and reboot wat do you see? Can you post a capture of it?

Community Member

Re: 350 AP blew UP!

hello,

the console only provides the following options.

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

Re: 350 AP blew UP!

No worries mate. You are still in good shape. Here is a link that has information about recovering from an upgrade falure. Look about 3/4's of the way down and you will see what you listed here along with a step by step on what to do .

http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/products_tech_note09186a008019fea0.shtml

Good luck and let me know how you manage.

Please remember to rate all posts

Community Member

Re: 350 AP blew UP!

Thanks for the info Travis. That worked just great!

Perhaps TAC can update their records. My TAC case# F101543 - 352

Thanks again

Re: 350 AP blew UP!

Glad I could help!

Community Member

Re: 350 AP blew UP!

THANK YOU for this post....

Community Member

Re: 350 AP blew UP!

thank you thank you....

182
Views
20
Helpful
7
Replies
CreatePlease to create content