350 Clients and non cisco associating to the farthest ap
I have a cisco and non cisco wireless enviroment consisting on 85 aps . the clients seem to associate to the weakest signal instead of the best. I know the new cisco code has algorithims to help this by scanning for the best ap but the non cisco clients don't have that option. Is there any settings in the 350 access point that i can set the threshold before reassociation?
Re: 350 Clients and non cisco associating to the farthest ap
You can try changing the transmit power to something lower than 100 Mw on the AP that your clients are associating too. If you never want the clients to associate to this AP, then you would need to change the SSID.