Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

4402-50 ap question

If the controller support 50 ap's, and there are actually 58 ap's, if I disable 8 administratively, will i then see the other 50 that are up ?

I guess the question is if the controller manages 50 ap's regardless of status, or 50 active ap's ?

NM

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: 4402-50 ap question

No, a 4402-50 controller can only have 50 APs joined to it.

4 REPLIES
Gold

Re: 4402-50 ap question

No, a 4402-50 controller can only have 50 APs joined to it.

Community Member

Re: 4402-50 ap question

AIR-WLC4402-50-K9 can only 50 APs joined to it? if I added more license on WCS to 50 more, can I still able to join more APs?

Thanks

Re: 4402-50 ap question

hi,

No the 4400 and WISM models are HARD count. They dont take licenses, if you purchase a 4402-50, 50 is all you get. If you purchased a 5508, 2504 or WISM2, these models allow licenses.

Hope that helps ..

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Community Member

Re: 4402-50 ap question

Thank you very much. It is helps a lot

299
Views
0
Helpful
4
Replies
CreatePlease to create content