Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4402 APs w/different ssid's

I have WCS and 4402 WLC and would like to deploy access points in different builds all controlled from this single WLC. I'd like each building and ap's in the building have their own WLAN/ssid.

All the buildings are connected, via fiber to main campus switch where the WLC is located.

Can i do this and can someone point me in the right direction?

TIA

craig

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 4402 APs w/different ssid's

You can use wlan override to do this

It is located on the controller under Wireless|Access Points|802.11b/g/n or 802.11a/n

2 REPLIES

Re: 4402 APs w/different ssid's

You can use wlan override to do this

It is located on the controller under Wireless|Access Points|802.11b/g/n or 802.11a/n

New Member

Re: 4402 APs w/different ssid's

That did the trick!

Thanks Eric

153
Views
0
Helpful
2
Replies