Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4402WLC w/ 1252s & VLANS

I am testing things out for our wireless deployment for our home office and multiple other sites. We currently have Vlan10 for data and 100 for voice throughout all offices over MPLS. I have the WLC on a trunk port for 10-12 and the 1252 on a trunk port for 11-12. 11 is wireless data & 12 is wireless guest data. First how does this setup sound? Is there a better way? 2nd Do i need the access points on the data vlan? Also i have the WLC and DHCP scoopes setup, but do i need multiple gateways outside of this setup? It seems to be giving me problems trying to use my main gateway multiple times on the interfaces.

Hall of Fame Super Silver

Re: 4402WLC w/ 1252s & VLANS

You should keep your wired and wireless subnets seperated. For example;


Vlan X - Management/Ap Manager (Native Vlan)

Vlan 10 - Data

Vlan 12 - Guest

Vlan 100 - Voice


Vlan 11 - Wireless Data

Vlan 13 - Wireless Guest

Vlan 101 - Wireless Voice

The connection from the WLC to the Switch should be a dot1q trunk that only allows vlan X,13 and 1010. Add any other vlans if you have created additional dynamic interfaces.

Default gateway should always be the L3 interface of that subnet.

*** Please rate helpful posts ***
New Member

Re: 4402WLC w/ 1252s & VLANS

Wilson ,

I am setting up wireless network with WLC4402 , 1252 LAPs in my office. How to create those vlans for voice , video and data . Currently only vlan available is management and a DHCP pool in the WLC for the same.

Thanks ,