Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

5508 controller 8 ports ?

I am looking to configure if, 5508 controller's ports particularly in different VLANs and pull cable from the port and put it in L3 to it's belonging VLAN ? and at the same time all the different SSID will work as usual our standard and best practice that we do.

1 ACCEPTED SOLUTION

Accepted Solutions

you could but then you are

you could but then you are limiting yourself to 1G of connectivity.

 

You'd probably be better served by just ether channeling the ports that connect to the WLC and tagging the vlan/dynamic-interfaces so you can have up to 8G of aggregate bandwidth.

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

you could but then you are

you could but then you are limiting yourself to 1G of connectivity.

 

You'd probably be better served by just ether channeling the ports that connect to the WLC and tagging the vlan/dynamic-interfaces so you can have up to 8G of aggregate bandwidth.

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Bronze

Hi,Yes you can do this and it

Hi,

Yes you can do this and it will work.

and ether-channeling is good option for you to increase bandwidth as Steve mentioned.

 

 

 

37
Views
0
Helpful
2
Replies
CreatePlease login to create content