Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

8510 wireless controllers configured as HA and providing extra redundancy

I have two 8510 wireless controllers connecting to each other via the redundancy port, one WLC is the active controller and the 2nd WLC is the standby controller. Each WLC connects to a pair of Nexus 9708 distribution/router using Port1 and Port2. I like to know if there is any extra advantage to connecting the WLCs to both distribution routers and if it will add unnecessary complexity to the configuration.

 

Thanks;

 

Juan

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

I don't see an issue unless

I don't see an issue unless there is something going on between the Nexus pair.  The RP port is the main link that controls the HA.  I'm one to not tinker with something that has been working:)

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

I don't see an issue unless

I don't see an issue unless there is something going on between the Nexus pair.  The RP port is the main link that controls the HA.  I'm one to not tinker with something that has been working:)

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

-Scott
*** Please rate helpful posts ***
New Member

Thank you Scotty.

Thank you Scotty.

No, i can't see any advantage

No, i can't see any advantage to connecting the WLCs to both distribution routers using port 1 and port 2.

126
Views
0
Helpful
3
Replies