Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

a/g/n and a/n

why in cisco WLC we find a/g/n and a/n ? I mean why a/g/n togather and a/n togather ? what is the relationship in a/g/n and the relationship in a/n?? byanother words why a/n companed togather in WLC orWCS and the a/g/n also comained togather also why not g/n ??

4 REPLIES
Hall of Fame Super Silver

Re: a/g/n and a/n

Can you post a screen shot. You should only see two, one will be 802.11an and the other 802.11bgn.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: a/g/n and a/n

I believe this way you can seperate your wireless network antenna settings for 5GHz only networks vs. mixed 5 and 2.4 GHz.  For example channel bonding is not something you want on your 2.4 GHz network.

Hope that helps.

Bob

Re: a/g/n and a/n

Are you looking at the 'radio' selections under the WLAN properties?

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: a/g/n and a/n

I hope this can describe more my question !!

289
Views
0
Helpful
4
Replies
CreatePlease to create content