Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AAA Authorization Fail between WLC 2125 & LWAP 1042n

In my Wireless environment, WLC 2125 is connected to a LWAP 1042n. The WLC is succesfully providing DHCP IP to the AP but is unable to discover it. All are connected. During debug mode following error message is encountered in WLC 2125, "AAA Authorization Fail....".

Please suggest what to do.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: AAA Authorization Fail between WLC 2125 & LWAP 1042n

Make sure you don't have authenticate ap via aaa enabled on the wlc. Look under the Security tab in the wlc.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
2 REPLIES
Hall of Fame Super Silver

Re: AAA Authorization Fail between WLC 2125 & LWAP 1042n

Make sure you don't have authenticate ap via aaa enabled on the wlc. Look under the Security tab in the wlc.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

AAA Authorization Fail between WLC 2125 & LWAP 1042n

Here is a good doc that explains different errors:

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

-Scott
*** Please rate helpful posts ***
295
Views
0
Helpful
2
Replies