Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Access http to Cisco Aironet 1600e Access point.

Hello,

When I try conectar http by default requires level 15, I would like to change this, I need authentication level 1(only read).

This is the mesage in the window:

The server 192.168.28.121 at level_15 or view_access requires a username and password.

This is technical information about my AP:

System Software Version:  Cisco IOS Software

Product/Model Number:           AIR-SAP1602E-E-K9

Top Assembly Serial Number:           FGL1733W1GH

System Software Filename:           ap1g2-k9w7-tar.152-2.JB2

System Software Version:           15.2(2)JB2

Bootloader Version:           BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)

***********

PALAP11#show runn

Building configuration...

Current configuration : 4888 bytes

!

! Last configuration change at 20:19:04 UTC Sat Mar 6 1993 by admin

version 15.2

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname PALAP11

!

!

logging rate-limit console 9

enable secret 5 $1$k0bT$pwHp/.ZJWY5FgZGaO2GDx.

!

aaa new-model

!

!

aaa group server radius rad_eap

!

aaa group server radius rad_mac

!

aaa group server radius rad_acct

!

aaa group server radius rad_admin

!

aaa group server tacacs+ tac_admin

!

aaa group server radius rad_pmip

!

aaa group server radius dummy

!

aaa authentication login default local

aaa authentication login eap_methods group rad_eap

aaa authentication login mac_methods local

aaa authorization exec default local

aaa accounting network acct_methods start-stop group rad_acct

!

!

!

!

!

aaa session-id common

no ip routing

no ip cef

!

!

!

dot11 syslog

!

dot11 ssid gesinfwifi

   vlan 1

   authentication open

!

dot11 ssid geswifivoz

   vlan 6

   authentication open

   guest-mode

!

!

crypto pki token default removal timeout 0

!

!

username admin privilege 15 password 7 071D244F41191504

username gestamp password 7 09404B0A0D100513

!

!

bridge irb

!

!

XXXXXXXX

!

ip default-gateway 192.168.28.10

ip forward-protocol nd

ip http server

ip http authentication aaa

no ip http secure-server

ip http path flash:

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

ip radius source-interface BVI1

!

                                             XXXXXXXX

radius-server attribute 32 include-in-access-req format %h

radius-server vsa send accounting

!

bridge 1 route ip

!

!

!

line con 0

line vty 0 5

transport input all

!

end

********

This doesn't happen with other APs, like this other model:

System Software Version: IOS (tm) C1200 Software (C1200-k9w7-M)

Product / Model Number: AIR-AP1231G-E-K9

Top Assembly Serial Number: FCZ0842Z1NK

System Software Filename: c1200-k9w7-tar.122-15.JA

System Software Version: 12.2 (15) JA

Bootloader Version: 12.2 (8) JA

Maybe this isn't achieved through the configuration of the AP.

http://hardforum.com/showthread.php?t=1551053

According to what I have researched this happens to most people, and the right question would be:


How to get into the web interface and change the radius power levels ...?

Thanks for your help,

dicu

El mensaje fue editado por: di cu

743
Views
0
Helpful
0
Replies