cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6752
Views
0
Helpful
6
Replies

Access Point Hostname

kirankumarhm
Level 1
Level 1

Hi,

I am planning to implement LAP in my network, (1250 and 1140 series)

I would like to know what is the minimum and maximum Characters can be assigned to an LAP.

Thanks,

6 Replies 6

Surendra BG
Cisco Employee
Cisco Employee

Normally names can be upto 63 characters...

Regards
Surendra BG

Thanks for your reply,

is there any supporting document on cisco website or its your practical experience ?

Surendra BG
Cisco Employee
Cisco Employee

minimum is 1 i guess.. not sure, i hv not tried..

Regards
Surendra BG

Practical experience.. and also came to know using the below doc..

https://www.cisco.com/en/US/docs/wireless/bridge/1400/12.3_8_JA/configuration/guide/p38adm.html

the doc is for autonomous.. however, if we have the LAP and if we issue the command "debug lwapp/capwap console cli" , "config t" , hostname , its the same..

Regards
Surendra BG

Practical experience.. and also came to know using the below doc..

https://www.cisco.com/en/US/docs/wireless/bridge/1400/12.3_8_JA/configuration/guide/p38adm.html

the doc is for autonomous.. however, if we have the LAP and if we issue the command "debug lwapp/capwap console cli" , "config t" , hostname , its the same..

Regards
Surendra BG

Thanks for your reply,

I have read one more document from cisco site,

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43frst.html

here for 1200 series AP they have mentioned "You can enter up to 32 characters for the system name."

thats why I wanted to confirm will LAP support more than 32 characters or not.

I am designing a Wireless for Company, these details are required to complete my decision.

Cheers

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: