02-14-2017 01:21 AM - edited 07-05-2021 06:33 AM
I have to install a new setup with WLC 2504 and 4 1832I access points. I am doing ot with the help of videos and documents as am new to Wireless infra.
I am able to configure WLC and its i am able to login the gui mode. I tested with one access point its showing as not joined in Moniter-->statics-->Ap joine (no ethernet MAc showing) Kindly help make my setup up
WLC ip:-10.4.2.25
Vlan is :-100
Do i need to creat diffrent vlan for Access point
switch side :-wlc connected interface I made as trunk port and access points are access vlan 100
Solved! Go to Solution.
02-15-2017 05:09 AM
I updated the wlc software and country code still its not joining
how to check further, I am not yet received the license (smart net contract) doe it make any issue. I am able to see the Ap but its not joining
02-14-2017 07:39 AM
Here is a link to all the 2504 downloads. You need to have support on the product in order to download:
https://software.cisco.com/download/release.html?mdfid=283848165&flowid=24841&softwareid=280926587&release=7.4.150.0&relind=AVAILABLE&rellifecycle=MD&reltype=latest
-Scott
*** Please rate helpful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide