What exactly are you trying to achieve? Are you wanting a bridge link between two sites or are you expecting a client to connect to an AP 30km away?!
You can theoretically get a link to operate over 40km using a dish antenna but you must have line of sight and be free of RFI to get that far, it would be 1MB data rate at that range. If your intention is for a site to site link with wireless clients at each site I would use a 1310 bridge with dish antenna at each site and one (or more) 1242 AP's at each site for clients.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...