Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

VIP Purple

access points are directly connected to 2016 wlc but not functional

Hello All,

access points are directly connected to 2016 wlc.

Event log from the wlc

AP event log download completed.

======================= AP Event log Contents =====================

*Mar 1 00:00:30.157: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:00:30.161: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset

*Mar 1 00:00:30.190: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

*Mar 1 00:00:30.191: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Mar 1 00:00:30.204: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:00:31.190: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up

*Mar 1 00:01:00.088: %LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.

*Mar 1 00:01:00.088: %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.

*Mar 1 00:01:00.089: %LWAPP-3-CLIENTEVENTLOG: Did not get any DNS options from DHCP.

*Mar 1 00:01:00.089: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER

*Mar 1 00:01:00.089: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER

*Mar 1 00:01:12.094: %LWAPP-5-CHANGED: LWAPP changed state to JOIN

*Mar 1 00:01:12.094: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down

*Mar 1 00:01:12.094: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down

*Mar 1 00:01:12.094: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Mar 1 00:01:12.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

(Cisco Controller) >show port summary

           STP   Admin   Physical   Physical   Link   Link
Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE
-- ------- ---- ------- ---------- ---------- ------ ------- ---------
1  Normal  Forw Enable  Auto       100 Full   Up     Enable  N/A
2  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
3  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
4  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
5  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
6  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
7  Normal  Forw Enable  Auto       100 Full   Up     Enable  Enable  (Power On )
8  Normal  Forw Enable  Auto       100 Full   Up     Enable  Enable  (Power On )

but still access points are not functional ????

any idea ??

Regards

  • Getting Started with Wireless
Everyone's tags (2)
17 REPLIES
Hall of Fame Super Silver

Re: access points are directly connected to 2016 wlc but not fun

So the ap has joined the wlc? Did you create an SSID and make sure the admin status of the ap is enabled? The log doesn't tell me much, but make sure the country code of the ap matches what the wlc is set for.

Sent from Cisco Technical Support iPhone App

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
VIP Purple

access points are directly connected to 2016 wlc but not functio

Hi Scott,

Yes Admin status is enabled on both APs.

Country code is same ...

(Cisco Controller) >show ap join stats summary all

Number of APs.............................................. 2

Base Mac             AP EthernetMac       AP Name                 IP Address         Status
00:13:60:e7:ef:00    00:13:7f:28:8e:c3    WOECAP02                10.41.80.12        Joined
00:13:60:e8:00:d0    00:13:7f:28:8e:c5    WOECAP01                10.41.80.11        Joined

you can see the output.

Regards

access points are directly connected to 2016 wlc but not functio

Where does your AP get an ip address from?

It should be on same VLAN as management/AP manager interfaces if it is direclty connected.

Check the best practices here:

https://supportforums.cisco.com/docs/DOC-11760

What is your APs model?
what is your WLC code version?

Rating useful replies is more useful than saying "Thank you"
VIP Purple

access points are directly connected to 2016 wlc but not functio

HI Amjad..

The ap is getting ip from another interface (Barcoding).

Interface NameVLAN IdentifierIP AddressInterface Type

ap model 1232

Wlc 2106.

Re: access points are directly connected to 2016 wlc but not fun

Hi Sandeep,         

I did not understand where the AP get an IP from. What do you mean by it gets it from another interface? what do you mean by barcoding here?

What is the software versoin on the controller?

Rating useful replies is more useful than saying "Thank you"
VIP Purple

access points are directly connected to 2016 wlc but not functio

Software version is 6.0.196.0.

yes you were righr they are getting the ip same as managemnt vlan.

like management wlan have 10.41.80.1....

so my are getting 10.41.80.11 and 12

I can ping WLC but can not reach APs.

Regards

Hall of Fame Super Silver

access points are directly connected to 2016 wlc but not functio

Can you post your show run-config

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****

Re: access points are directly connected to 2016 wlc but not fun

I think you have AP WOECAP01 joined successfully, right?

Where is your DHCP server configured?

Please provide output from CLI:
> show interface summary.

Does you have the AP converted from autonomous mode?

Rating useful replies is more useful than saying "Thank you"
VIP Purple

access points are directly connected to 2016 wlc but not functio

HI Amjad:

(Cisco Controller) >show interface summary

Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
ap-manager                       1    80       10.41.80.2      Static  Yes    No
barcoding                        1    81       10.41.81.1      Dynamic No     No
management                       1    80       10.41.80.1      Static  No     No
virtual                          N/A  N/A      10.41.21.254    Static  No     No

848
Views
0
Helpful
17
Replies
This widget could not be displayed.