cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1291
Views
0
Helpful
7
Replies

Access Points not joining WLC

lukedp
Level 1
Level 1

Hello All,

I am trying to deploy several AIR-CAP3502E-E-K9 access points from a cisco 5508 wire lan contoller running ver 7 code. However iam having difficulty regiserting the access points with the WLC. The wlc is connect to a 3650 switch, and each access point is connected to a 2960 switch.

Problem Solved. A bad update was not allowing the access points to get their correct firmware.

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

Can you please post the output to the following commands:

1.  WAP:  sh inventory;

2.  WLC:  sh sysinfo

3.  WAP:  sh version

View solution in original post

7 Replies 7

Leo Laohoo
Hall of Fame
Hall of Fame

Can you please post the output to the following commands:

1.  WAP:  sh inventory;

2.  WLC:  sh sysinfo

3.  WAP:  sh version

I seem to be unable to telnet or ssh to the WAP

I seem to be unable to telnet or ssh to the WAP

Kindly console into the WAP and post the output to the following commands

1.  sh version;

2.  sh inventory; and

3.  sh logs

Can you please post the output to the following command from the WLC?

sh sysinfo

You need to provide what Leo stated, that would help a lot. Anyways you can't telnet or ssh into a capwap AP if it has not joined the WLC. So that being said, provide the info Leo requested and then console into the ap and provide use with output from the console. Make sure you reboot the AP and then start capturing the output for around 5 minutes.

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***

Leo Laohoo
Hall of Fame
Hall of Fame

Thanks for the ratings but can you please tell us what did you do to fix the issue?  I am curious to know what was the outcome.

Hello leolaohoo,

I update the code from version 7 to version 7.2 and the access point proceeded to register to WLC.

Thankyou to all for your assitance.

Ok.  Thanks Luke.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: