06-28-2012 10:41 AM - edited 07-03-2021 10:21 PM
in current environment i have 3SSID , SSID_1, SSID_2 and SSID_3
most AP requires all 3 of them
certain AP in certain location such as in the lobby, i just need SSID_1
is this possible? any hint on this?
Solved! Go to Solution.
06-28-2012 10:47 AM
Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.
Sent from Cisco Technical Support iPhone App
06-28-2012 10:47 AM
Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.
Sent from Cisco Technical Support iPhone App
06-28-2012 10:49 AM
Thanks scott ! This will do the trick !
06-28-2012 10:50 AM
No problem and thanks for using the rating system!
Sent from Cisco Technical Support iPhone App
06-28-2012 10:49 AM
Here is a good link
https://supportforums.cisco.com/docs/DOC-19033
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: