Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Add a vlan with wpa-psk using CLI

Hello,

I must configure a Cisco Aironet 1100 :

Here is the first configuration : no vlan with 128 key WEP. I keep this configuration in wep (no associated with a vlan) for the moment.

Now I have to create a vlan associated with wpa-psk with simple config (no server manager, no radius, no eap).

For example to declare this configuration, I think to use these CLI :.

ap(config) interface Dot11Radio0.2

ap(config-subif) encapsulation dot1Q 2

ap(config-subif) bridge-group 2

ap(config-subif) exit

ap# copy running-config startup-config

AP(config)#interface dot11Radio 0.2

AP(config-if)#encryption mode ciphers tkip

AP(config-if)#ssid xxxx

AP(config-if-ssid)#authentication key-management wpa

AP(config-if-ssid)#wpa-psk ascii xxxx

Do you think that these CLI are sufficient and

have you to modify the other peripherals networks (router...).

Now with wep and no-vlan you can connect on network.

Thank you for your help.

Eddy

323
Views
0
Helpful
0
Replies