Adding an External Antenna to a Aironet Wireless Adapter
I am using a Cisco Aironet (AIR-CB21AG-A-K9) 802.11a/g/b Wireless Adapter. In the area that I am working the reception is not 100% and I thought that an additional external antenna might be a simple fix. Am I on track with the idea? Can anyone suggest an antenna that I could buy that would work with this particular card?
Re: Adding an External Antenna to a Aironet Wireless Adapter
We have many cards like yours and they dissappoints! The reception is poor on them comparing to other cards as Linksys, old Compaq WL110 etc. Would expect more of a card that is rather expensive. I have seen socalled high power cards on the web, but cant remember any names now.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...