Scenario - how to get access to MAP for initial configuration if I don't have a physical connectivity between WLC and MAP ( or does it really required?)
If i want to add a MAP (child) to a wireless mesh network,is there any basic configuration I should apply on MAP to get it associated with controller?. My understanding is that (1) adding the mac address of MAP to WLC mac filter list enables the child access point to associate to controller first, so that i can configure the rest from controller. (2). Don't require a physical connectivity between MAP and controller for any initial configuration since MAP will try to associate to controller wirelessly via nearest RAP once it's powered up.
Appreciate if you can let me know my understanding is right iPod wrong.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...