Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adjacent Channel interference

I read about 'adjacent channel interference'. Wanted to confirm with the experiened folks out there if there could really be a problem with 'adjacent channel' interference where the APs are on non overlapping channels but are placed too close together? If so, shouldnt RRM resolve?

3 REPLIES

Adjacent Channel interference

RRM will help, but it really can't 'fix' a bad design.  If you are too dense, the WLC may not be able to lower power enough to stop the interference.  

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Cisco Employee

Adjacent Channel interference

with 5ghz, it should not be an issue.

with 2.4ghz, if ap power is least then it should not affect. when ap on max power, only side bands get affected due to overlap.

New Member

Adjacent Channel interference

Are you able to 'see' this when looking at the channel from Cisco Spectrum Expert?

337
Views
0
Helpful
3
Replies
CreatePlease login to create content