Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Admin User/Password Block - No Access to Configure

Hi All,

I configured the access point with username/passwords. The usernames are not the runof the mill usernames. Now I apparently forgot the username and even with console in, Its asking for the password. Becoz of which i cant even configure the AP to my needs. Can anybody gimme a rundown process and any links that you know which can help me. I tried to do a :resetall and even that is asking for a password. Can anyone please let me know of any ways I can access the device and reset the password. I have got snmp read write access to the device if that can help.

Thanks

N.....v

  • Getting Started with Wireless
1 REPLY
New Member

Re: Admin User/Password Block - No Access to Configure

Manual Process for Deleting the Configuration on AP1200

December 13, 2002

Step 1: Reboot the AP and watch for the “Memory Bank” file listing.

Step 2: When you see the file listing, type Ctrl-W.

Testing DRAM...

(press to bypass)

DRAM OK

Power-on reset.

Copyright 1996-2000 Cisco Systems, Inc.

Copyright 1984-2000 Wind River Systems, Inc.

System ID: 0009E8ACA97D

Motherboard: IBM405 200MHz, 8192KB FLASH, 16384KB DRAM, Revision 03

Bootstrap Ver. 1.00: FLASH, CRC 1C914641 (OK)

Initialization: OK

Memory Bank total used left

DRAM 16742624 0 16742624

Config 524288 348 523940

FLASH 7602176 1276940 6325236

Memory Bank:File address size encoding type flags

a) Config:AP Installation Key FF820000 80 none Key 0000

b) Config:AWC_ConfigDB FF820050 268 AiroDB1 Data 0000

c) FLASH :EnterpriseAP Sys 11.54 FF8A0000 1040624 gzip Exec 0901

d) FLASH :EnterpriseAP Web 11.54 FF99E0F0 120636 .tar.gz Web 0000

e) FLASH :Inflate Ver. c14o FF9BB82C 7496 gzip Dcdr 0900

f) FLASH :350 Series FW 4.99.72 FF9BD574 53708 .tar.gz Data 0000

g) FLASH :AIR-RM20A FW 4.99.72 FF9CA740 54396 .tar.gz Data 0000

h) FLASH :AP Installation Key FF9D7BBC 80 none Key 0000

Ctrl-W

Step 3: Look at the file listing by typing f.

Type '=' for main menu.

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

f

Memory Bank total used left

DRAM 16742624 0 16742624

Config 524288 348 523940

FLASH 7602176 1276940 6325236

Memory Bank:File address size encoding type flags

a) Config:AP Installation Key FF820000 80 none Key 0000

b) Config:AWC_ConfigDB FF820050 268 AiroDB1 Data 0000

c) FLASH :EnterpriseAP Sys 11.54 FF8A0000 1040624 gzip Exec 0901

d) FLASH :EnterpriseAP Web 11.54 FF99E0F0 120636 .tar.gz Web 0000

e) FLASH :Inflate Ver. c14o FF9BB82C 7496 gzip Dcdr 0900

f) FLASH :350 Series FW 4.99.72 FF9BD574 53708 .tar.gz Data 0000

g) FLASH :AIR-RM20A FW 4.99.72 FF9CA740 54396 .tar.gz Data 0000

h) FLASH :AP Installation Key FF9D7BBC 80 none Key 0000

Step 4: Hit the enter key to list the commands again.

Step 5: Copy the “AP Installation Key” from Config memory to DRAM.

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

c

Copy Into Bank:

1 -- DRAM

2 -- Config

3 -- FLASH

1

File To Copy:

a -- AP Installation Key

b -- AWC_ConfigDB

c -- EnterpriseAP Sys 11.54

d -- EnterpriseAP Web 11.54

e -- Inflate Ver. c14o

f -- 350 Series FW 4.99.72

g -- AIR-RM20A FW 4.99.72

h -- AP Installation Key

a

Step 6: Verify that there is a copy of the “AP Installation Key” in DRAM.

Step 7: Format the Config memory.

Memory Bank total used left

DRAM 16742624 80 16742544

Config 524288 348 523940

FLASH 7602176 1276940 6325236

Memory Bank:File address size encoding type flags

a) DRAM :AP Installation Key 00008720 80 none Key 0000

b) Config:AP Installation Key FF820000 80 none Key 0000

c) Config:AWC_ConfigDB FF820050 268 AiroDB1 Data 0000

d) FLASH :EnterpriseAP Sys 11.54 FF8A0000 1040624 gzip Exec 0901

e) FLASH :EnterpriseAP Web 11.54 FF99E0F0 120636 .tar.gz Web 0000

f) FLASH :Inflate Ver. c14o FF9BB82C 7496 gzip Dcdr 0900

g) FLASH :350 Series FW 4.99.72 FF9BD574 53708 .tar.gz Data 0000

h) FLASH :AIR-RM20A FW 4.99.72 FF9CA740 54396 .tar.gz Data 0000

i) FLASH :AP Installation Key FF9D7BBC 80 none Key 0000

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

U -- Upgrade bootstrap from file

! -- FORMAT memory bank

!

FORMAT Memory Bank:

1 -- DRAM

2 -- Config

3 -- FLASH

2

Confirm FORMAT (will Erase All Files in bank!):

Y -- *FORMAT*

N -- CANCEL

Y

Memory Bank total used left

DRAM 16742624 80 16742544

Config 524288 0 524288

FLASH 7602176 1276940 6325236

Step 8: Copy “AP Installation Key” back into Config memory.

Memory Bank:File address size encoding type flags

a) DRAM :AP Installation Key 00008720 80 none Key 0000

b) FLASH :EnterpriseAP Sys 11.54 FF8A0000 1040624 gzip Exec 0901

c) FLASH :EnterpriseAP Web 11.54 FF99E0F0 120636 .tar.gz Web 0000

d) FLASH :Inflate Ver. c14o FF9BB82C 7496 gzip Dcdr 0900

e) FLASH :350 Series FW 4.99.72 FF9BD574 53708 .tar.gz Data 0000

f) FLASH :AIR-RM20A FW 4.99.72 FF9CA740 54396 .tar.gz Data 0000

g) FLASH :AP Installation Key FF9D7BBC 80 none Key 0000

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

c

Copy Into Bank:

1 -- DRAM

2 -- Config

3 -- FLASH

2

File To Copy:

a -- AP Installation Key

b -- EnterpriseAP Sys 11.54

c -- EnterpriseAP Web 11.54

d -- Inflate Ver. c14o

e -- 350 Series FW 4.99.72

f -- AIR-RM20A FW 4.99.72

g -- AP Installation Key

a

Step 9: Run the firmware or reboot the AP. The AP will boot with no config and no passwords.

Memory Bank total used left

DRAM 16742624 80 16742544

Config 524288 80 524208

FLASH 7602176 1276940 6325236

Memory Bank:File address size encoding type flags

a) DRAM :AP Installation Key 00008720 80 none Key 0000

b) Config:AP Installation Key FF820000 80 none Key 0000

c) FLASH :EnterpriseAP Sys 11.54 FF8A0000 1040624 gzip Exec 0901

d) FLASH :EnterpriseAP Web 11.54 FF99E0F0 120636 .tar.gz Web 0000

e) FLASH :Inflate Ver. c14o FF9BB82C 7496 gzip Dcdr 0900

f) FLASH :350 Series FW 4.99.72 FF9BD574 53708 .tar.gz Data 0000

g) FLASH :AIR-RM20A FW 4.99.72 FF9CA740 54396 .tar.gz Data 0000

h) FLASH :AP Installation Key FF9D7BBC 80 none Key 0000

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

r

c -- EnterpriseAP Sys 11.54

c

Inflating "EnterpriseAP Sys 11.54"...

2871408 bytes OK

161
Views
0
Helpful
1
Replies